To bring new flooring options to most homeowners, carpet tiles were created not too long ago. In the past, carpet tiles were made as an alternative to wide carpets. However, when innovators discovered the many advantages of this special floor tile, it is widely used to this day.
Carpet tiles are also known as soft modular floors. If you look closely, this type of cladding resembles a carpet, but its dimensions are similar to tiles, so it is easy to fit them on any floor. If you are considering giving your floor a new lease of life, consider installing carpet and floor tiles for your home. Here are the three benefits you can get from installing them at home.
This type of upholstery brings convenience. They are easy to install and easy to transport. You can buy a box of it and put it in the back of your car. Since they are made of materials similar to wide rugs, they are usually easy to wear compared to traditional materials.
They come with a strong backing so you don’t need to apply any padding or glue to the floor. This way you can save time and money when laying floor tiles. On the other hand, they are very easy to use, so you can even do it yourself, saving you another dollar in professional costs.
Easy to maintain
To clean it, you don’t have to scrub it like other tiles. All you need to do is vacuum regularly to remove dust and dirt. For spills, however, you can scrape the spill, but make sure to use the edge of the spill to prevent the stain from spreading. You can also scrub gently with a solution of water and dish soap.
If your home is new or under renovation, you should definitely install new tiles for your floor to keep it looking fresh and elegant. A well-thought-out design and a good installation are of great importance for the realization of this project. Think about it, you could spend a lot of money on nicely designed tiles, but if not installed properly they will only look cheaper than they actually are. That is why you really have to pay extra attention when laying floor tiles in the house.
If you want to create the best look for your home, keep the following points in mind when laying floor tiles:
1. Have a rough sketch of the tile pattern you want to use. When making a sketch, use the actual size of the tiles and the surface to be tiled. After estimating the number of tiles needed, add some more to avoid breakage during installation.
2. Then make sure that the area to be tiled is clean. You can also level the floor first by securing the floor with cement. When they are in place, leveling the floor will prevent the tiles from breaking. Or another option for leveling the floor is to put plywood on the floor and install tiles on it.
3. After you have everything set up and ready to lay the tiles, start in the center of the room and continue laying the tiles along the wall.
4. When you realize that the tiles are too big to fit in a specific room, you can easily cut them with a tile cutter.
Finally, after laying all the tiles, all joints between the floor tiles must be sealed. This prevents stains and dirt from entering the tile space. If you follow these tips, you will definitely achieve the look you want for that particular space.
Article source: http://EzineArticles.com/2613216